Angle Bead Common Specifications

Angle beads are designed for internal use and outer plaster uses, manufactured from quality galvanized steel sheet, expanded or perforated mesh. Can be reinforced with flange wings or standard beads. Materials can be stainless steel or galvanized steel.

Below the stainless steel angle bead specification table:

TP Code	Stop Bead		material	T × L
987922	(exterior use) 3 m 20		Stainless Steel	16 × 53 20 × 53
987920	(exterior use) 3 m 20		Stainless Steel	16 × 64 20 × 64
987962	(interior use) 2.4 m 10/13		Pre-Galvanized Steel	10 × 55 13 × 55
987981	(interior use) 2.7 m 10/13		Pre-Galvanized Steel	10 × 55 13 × 55
987963	(interior use) 3 m 10/13		Pre-Galvanized Steel	10 × 55 13 × 55
987967	(interior use) 2.4 m 10/13		Pre-Galvanized Steel	10 × 46 13 × 46
987968	(interior use) 2.7 m 10/13		Pre-Galvanized Steel	10 × 46 13 × 46
987969	(interior use) 3 m 10/13		Pre-Galvanized Steel	10 × 46 13 × 46
987977	mini mesh 2.4 m		Pre-Galvanized Steel	3 × 25
987978	mini mesh 3 m		Pre-Galvanized Steel	3 × 25
987965	for 3 plaster 2.4 m	This bead is like a sandwich. There's a thick piece (24) of board on the inside then a thinner sheet (3) outside	Pre-Galvanized Steel	3 × 24
987964	for 3 plaster 2.7 m		Pre-Galvanized Steel	3 × 24
987966	for 3 plaster 3 m		Pre-Galvanized Steel	3 × 24
554603	135DG 2.4 m	A corner bead creating a 135° angle on a thin board requiring little reinforce ment.	Pre-Galvanized Steel	3 × 24
235620	135DG 3 m		Pre-Galvanized Steel	3 × 24
987989	(exterior use) white 3 m	Protects plastered corners.	Galvanized Steel+ PVC nosing coating	20 × 52
				T × L × L1
554599	Extended Leg (thin) 2.4 m	Creates a sandwich effect on a thin board requiring little reinforce ment	Pre-Galvanized Steel	3 × 24 × 30
235617	Extended Leg (thin) 3 m		Pre-Galvanized Steel	3 × 24 × 30

Inquiry for Our Product

Shandong Xingying Environmental Energy Technology Co. LTD
E-mail: info@plastermesh.com

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.